filter it will be on the lower portion of the filter. This unseating may cause leakage from your waste port.ħ. Before disassembling the body of your filter you will want to drain the system of its water. By using clockwise and counterclockwise turns of the lever you may cause unseating of the valve key gasket. When changing your valve setting be sure to always turn the lever in the same direction. Follow the steps below to remove your tank lid.ĥ. First, before disassembling your filter or changing the valve lever position turn off your pool pump to prevent any excessive water loss or safety hazards.Ħ. Now that your water is no longer circulating through your filter system, switch your valve to the "Closed" position.
If the tag contains that information you can call the manufacturer and provide them the serial which should allow them to return the model of your filter.Ĥ. If those pieces of information are unattainable you can remove the top of the filter to access the grids and read their tag. The unit tag information may have become worn and unreadable, making it difficult to determine the size and type you need.ġ. Tools you will need: 1) Wrench - medium 2) Rubber Mallet or Ball Peen Hammer - medium 3) Pliers 4) Dust mask to protect yourself from any dangerous inhalation of particles.Ģ. The first step when determining your grid size is to check your owner’s manual to find the make and model listed in its contents.ģ. Without an owner's manual handy you can read the unit's tag info, this should provide at least the manufacturer and a serial number.
#D.e.filter grids manuals
In that time key information like owner’s manuals could have been lost. When it comes time to replace the grids on your D.E. This guide provides a step-by-step procedure for determining D.E.
0 kommentar(er)
